Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.9206322

- Product Categories
- Friendly Links
- home > Supply > Supply Atlas Lubricants / air compressor oil / compressor rotor jet fluid 2901052200
Information Name: | Supply Atlas Lubricants / air compressor oil / compressor rotor jet fluid 2901052200 |
Published: | 2012-11-16 |
Validity: | 750 |
Specifications: | |
Quantity: | 100.00 |
Price Description: | |
Detailed Product Description: | Atlas air compressor oil, also known as the Atlas Lubricants, Atlas rotor jet fluid. Specification: 5L / barrel (2901024501) and 20L / barrels (2901052200), 209L / barrel (2901004501). Screw oil is good or bad to have a decisive impact on the performance of the oil-injected screw machine, good oil with good oxidation stability, rapid separation, clear bubble resistance, high viscosity, good corrosion resistance, and therefore, the user must use pure the special screw oil. 1 new machine run-in period of 500 hours after the first oil replacement, replacement oil after every 2000 hours of operation. The best oil change, oil filter replaced at the same time. Shorten the replacement cycle in the harsh environment of the place. Replacement method: a starter compressor running five minutes, the temperature rose to above 50 ℃, the decline in oil viscosity. b. stops running, when oil barrels memory 0.1Mpa pressure, open the drain valve at the bottom of barrels of oil and gas, connected to storage tanks. Oil drain valve should open slowly, so as not to bring pressure with temperature lubricants scattered wounding dirt. Close the drain valve and other lubricating oil into droplets. Unscrew the oil filter, the lubricating oil in the pipeline simultaneously exhausted and put on a new oil filter. c. open the fuel filler screw plug and inject new oil, the oil level in the oil standard scale line within tighten the oil filler screw plug, check for leakage. d. lubricants during use must frequently check the oil level is too low line should replenish oil, the lubricant must always discharge condensate, the general emissions once a week, in a high-temperature climate should be 2 - three days emissions. More than four hours of downtime, hit the open valve barrels of oil and gas under no pressure to discharge condensate quickly close the valve when the oil outflow. e. different brands of lubricants non-mixed use, avoid lubricants extended use, otherwise lubricant quality decline, poor lubricity, flash point reduction, can easily result in high-temperature shutdown, causing oil spontaneous combustion. Electrical and Mechanical Technology Co., Ltd. of Hunan Public perennial majority Atlas air compressor user-oriented and Atlas air compressor parts dealers for the supply of Atlas Copco oil and Atlas Air Compressor Parts, service hotline 0731-89721790! our website; http://www.csaircomp.com |
Admin>>>
You are the 4064 visitor
Copyright © GuangDong ICP No. 10089450, The Hunan Public Electrical Technology Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 4064 visitor
Copyright © GuangDong ICP No. 10089450, The Hunan Public Electrical Technology Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility